Estimate Your Reflective Roof Coating Rebate
For flat and low-slope commercial roofs. Austin Energy rebates $0.25 per square foot of qualifying reflective coating. Three quick questions and one optional one, no sign-up.
The rebate estimator needs JavaScript. To work it out by hand, multiply your roof area by the rebate per square foot. Or ask our commercial roofers:
Estimated Austin Energy rebate
Likely a Good Candidate for a Reflective Coating
A structurally sound flat roof is what coatings are made for. A coating can seal minor wear, reflect the sun, and add years of service at a fraction of the cost of replacement. An inspection checks for trapped moisture first.
Repair the Leaks, Then Coat
Coatings can resolve many leaks at seams and small cracks, but the source of each leak should be found and repaired before the coating goes on. Leaks from failed flashing or structural problems need their own repairs. Once the roof is sound, a coating can protect it.
Replacement May Be the Better Value
Coatings go over a sound roof system, not one that's failing. Widespread soft spots, major ponding, or saturated insulation can mean part or all of the roof needs replacing. An inspection will show how much, and whether any of it can be saved.
An Inspection Decides Between Coat, Repair, and Replace
Age alone doesn't rule out a coating. What matters is whether the roof is structurally sound and dry underneath. An inspection, including a check for trapped moisture, tells you which option fits.
How the Austin Energy Rebate Works
Austin Energy's reflective roof coating rebate is for commercial electric customers applying a coating with at least 75% reflectivity to an existing, non-reflective roof. You must apply before the coating goes on, and standard commercial rebates can't exceed 50% of total job costs. Existing reflective roofs and new construction aren't eligible.
This is an estimate, not a quote or a rebate approval. Austin Energy sets the rebate amount and rules and can change them; only Austin Energy can confirm eligibility. Energy savings depend on the building, its insulation, and its cooling system.
Cool Roofs and Austin Energy’s Coating Rebate
Austin summers are hard on flat commercial roofs and on the cooling bills under them. According to Austin Energy, traditional roofs can reach 150 degrees or more in the summer. A reflective roof coating keeps more of that heat off the building, and Austin Energy’s commercial program pays a rebate for every square foot of qualifying coating you apply.
LOA Construction and Roofing built this estimator for property managers and business owners who want a quick, honest read before they call anyone: roughly what the rebate could be, what the energy savings might look like, and whether the roof is a good candidate for a coating at all.
How the Estimate Is Worked Out
- Roof area. The rebate is paid per square foot of coating, so the estimate starts with the area to be coated. For a flat roof, the building’s footprint is a close estimate.
- Rebate rate. The estimator multiplies the area by Austin Energy’s current rate for reflective roof coatings. We keep that rate up to date in our settings as the program changes.
- Roof condition. Your answer sets the verdict: coat, repair and then coat, replace, or have it inspected first.
- Existing reflectivity. Austin Energy’s rebate is for existing roofs that aren’t reflective yet, so an already white or reflective roof won’t qualify.
- Cooling cost (optional). Add what the building spends on air conditioning in a year for a rough savings range.
If you add the building’s yearly cooling cost, the result also estimates energy savings. The Cool Roof Rating Council puts the average savings from a cool roof at 7% to 15% of total cooling costs, so a building that spends $10,000 a year on air conditioning might save about $700 to $1,500. Treat it as a planning range, not a promise: real savings depend on the building, its insulation, and its cooling system.
Rebate Rules Worth Knowing
The Austin Energy reflective roof coating program has a few rules that catch people out:
- You must apply for the rebate before the coating goes on. Rebates aren’t paid retroactively.
- The coating must have a minimum reflectivity of 75%, with test data included in the application.
- The installation needs at least a one-year warranty, and the materials at least a three-year warranty.
- Standard commercial rebates can’t exceed 50% of the total job cost.
- Existing reflective roofs and new construction aren’t eligible.
Ask whether your contractor is registered with Austin Energy. We’re happy to help you check current eligibility before any work is scheduled.
Coat, Repair, or Replace?
A coating is only as good as the roof under it. As our roof coating FAQs explain, coatings are applied over a sound roof system, not one that’s already failing.
- Coat: The roof is structurally sound and dry, with surface wear but no active leaks. This is where a coating gives the best value.
- Repair, then coat: Leaks at seams or small cracks can often be handled as part of a coating project, but each leak source needs to be found and repaired first. Leaks from failed flashing or structural problems need their own repairs.
- Replace: Widespread soft spots, major ponding, or saturated insulation can mean part or all of the roof needs replacing. A coating over a wet or failing roof won’t last.
Age alone doesn’t rule out a coating. What matters is whether the roof is sound and dry underneath, which is why an inspection includes a check for trapped moisture.
What a Coating Can Do
Most professionally installed roof coatings last 10-20 years in Austin, depending on the product and the roof’s condition. A coating can seal minor leaks, reflect the sun, and delay a full replacement at a fraction of its cost. Our roof coatings page covers the coating types we use, and our cool roofing solutions for Austin page explains the benefits beyond the energy bill.
There are honest limits too. A coating won’t fix a structural problem, and it needs regular inspections and cleaning to keep its reflectivity.
Minimal Downtime, Clear Numbers
Commercial roofing work should fit around your business, not the other way around. LOA offers no-cost, same-day roof inspections, and drone inspections when you can’t be on site. We’ll check the roof, look for moisture, and give you a side-by-side recommendation with honest pricing, so you can decide what’s right for the building. See our commercial roofing services for more.
Schedule a free inspection with LOA, your local Austin roofing company, or call us at (512) 375-3654.
Frequently Asked Questions
How Much Is the Austin Energy Cool Roof Rebate?
Austin Energy currently rebates a set amount per square foot of qualifying reflective roof coating for commercial customers, and this estimator uses that rate. Standard commercial rebates can’t exceed 50% of the job cost, and the program can change, so confirm the current terms with Austin Energy.
Can I Get the Rebate After the Coating Is Applied?
No. Austin Energy requires you to apply before the coating goes on, and rebates aren’t paid retroactively. Plan the application into the project schedule.
Is My Older Roof Too Far Gone for a Coating?
Not necessarily. Age alone doesn’t disqualify a roof. The bigger factors are whether it’s structurally sound and dry: widespread soft spots, major ponding, or saturated insulation usually point to repair or replacement instead.