Quality is at the heart of our Austin roofing company in every project we take on. Contact our experienced Central Texas roofers for a same-day, pressure-free inspection. Call 512-375-3654 to book your free inspection.
If you need a new roof installed, LOA is the roofing company to call! Our roofing experts are known for providing quality workmanship at a fair price. If you own a house or business in Central Texas you can’t afford to work with another roofer.
What Causes a Leaky Chimney and How to Fix It
Some roof penetrations are intentional, and the chimney is one of them. A lot of precautions have to be taken to make sure leaks don’t form around the chimney, but even if you’re careful it can still be a problem.
The solution is going to depend on what’s causing leaks around the chimney, and there could be a number of sources. No matter what, it’s a problem that you want to get checked out as soon as possible so the chimney leaks don’t turn into serious structural issues.
An experienced Austin roofing company can inspect the area around your chimney to identify flashing problems, damaged roofing materials, or other potential sources of leaks. A trusted Austin roofing company can recommend the appropriate repairs to help prevent chimney leaks from causing more extensive roof or structural damage.
Wondering if your chimney is causing a leak?
Contact Us for a FREE Roof Inspection to check for chimney leaks!
Chimney Repair Services When You Spot a Leak
Just like with other leaks, you’ll want to address a leaky chimney quickly so it doesn’t cause serious water damage. The first step is to have a chimney sweep provide an inspection of the interior to look for damage. You’ll also need to have a professional roofer like LOA inspect the exterior to look for signs of damage around the roof.
These professionals will help you determine what’s causing the leak and how it should be repaired.
Flashing Repairs
The damaged flashing will need to be removed carefully to avoid damaging the roof. The area is then cleaned before new flashing is put in place. The flashing needs to be precisely measured and cut for it to fit properly to prevent future leaks. Once the flashing is where it needs to be it’s carefully nailed down and sealed with roofing cement around the edges for a watertight seal. Caulk should also be used at the edge where the chimney and flashing meet.
Chimney Crown Repair
A damaged crown will need to be replaced or water will keep penetrating into the chimney. All the loose mortar needs to be removed before cracks can be sealed or filled in with cement. Once the cap is in place crown sealant is used to keep it there.
Chimney Liner Repairs
The existing chimney liner will most likely need to be removed and replaced. Before that happens you’ll need to choose a new liner. The options include a metal liner, a cement-like cast that’s poured or covering cracks with a heat shield.
Chimney Masonry Repairs
A mason will need to go over every inch of the chimney to seal up cracks that are allowing water to seep through. If you’ve experienced repeated chimney leaks it may be time to consider rebuilding the chimney. Poor construction will continue to create problems even with regular chimney cleaning and maintenance.



