Last updated:


What Causes Flapping or Tearing Roof Membranes on Austin Roofs?
When the roofing membrane begins tearing and flapping loose there are obviously some problems to address. And when it happens to a flat roof it’s really problematic because roofs with lower slopes are more susceptible to leaks.
The roof membrane is a waterproof layer that is used with some types of roofing systems to prevent roof leaks from happening. It’s primarily used in commercial roofing systems rather than residential roofing like asphalt shingles. For damage that needs attention now, see our roof repair in Austin.
If the roof membrane were to tear and start flapping loose it needs to be looked at immediately. Without a solid membrane your roof is highly vulnerable to further damage.
An experienced Austin roofing company can inspect your roof membrane for tears, loose sections, and other signs of damage that could leave the roofing system vulnerable. A trusted Austin roofing company can identify membrane problems early and recommend the appropriate repairs to help prevent leaks and further roof damage.
Has your roof membrane started tearing and flapping loose?
Contact Our Team For a Free Roof Inspection to Evaluate the Membrane
How LOA Repairs Flapping or Tearing Roof Membranes in Austin
A membrane tear requires roof repair. You won’t need an entire roof replacement, but the tear will need to be patched. If the problem isn’t addressed there’s a good chance you’ll have a roof leak to fix as well.
Inspect the Roof to Find the Tear
The first step in repairing a roof membrane tear is finding it. A professional roofer can inspect the entire roof to determine where the membrane tear is and if there are any other tears or contributing factors that need to be fixed.
Repair and Patch the Tear
Exactly how the tear is repaired depends on the roofing material. It’s important to always consult with the material manufacturer and only work with a roofer that’s experienced using the material. The basic process is to:
- Get a new piece of membrane that’s slightly larger than the tear.
- Apply adhesive and carefully lay the piece of membrane over the tear.
- Create a watertight seal along the edge of the patch.
- Test the patch to ensure there are no water leaks.
Monitor and Maintain
After the repairs are made, keep an eye on the area. Look for signs of a leaking roof, like water stains on the ceiling. Given that one tear has already happened, roof maintenance is more important than ever. Regular roof inspections and maintenance measures will help catch problems before they turn into a major tear.
LOA has roofing solutions for roof membrane tearing and flapping. If you need those solutions in the Austin, TX area, give us a call at (512) 375-3654.

Warning Signs of Flapping or Tearing Roof Membranes
A membrane that flaps in the wind or has visible tears is the obvious sign. On a flat roof it’s especially problematic, because low-slope roofs are more susceptible to leaks, so also look for signs of a leaking roof, like water stains on the ceiling.
Preventing Flapping or Tearing Roof Membranes
Not all of the causes can be prevented, but you can be prepared for them. Keep foot traffic on the roof to a minimum, have the membrane installed properly by an experienced roofing contractor, and plan for wear and tear as the roof ages, since even a durable roof installed properly 20 years ago will need attention.
Why Our Customers Think LOA is the Best Austin Roofing Contractor
←
→
