Faulty Flashing in EPDM Roofing in Austin: Causes, Signs & Repair

Faulty Flashing in EPDM Roofing

Home • Austin Roofing • Common Issues • Faulty Flashing

Work With the Best Roofing Contractors in Central Texas

Gray EPDM roof on a flat roof beside a brick wall – from LOA's guide to faulty flashing in EPDM roofing in Austin

Last updated:

Quality is at the heart of our Austin roofing company in every project we take on. Contact our experienced Central Texas roofers for a same-day, pressure-free inspection. Call (512) 375-3654 to book your free inspection.

If you need a new roof installed, LOA is the roofing company to call! Our roofing experts are known for providing quality workmanship at a fair price. If you own a house or business in Central Texas you can’t afford to work with another roofer.

Find out how much roof replacement will cost in Austin, Texas and the surrounding areas.
Roofer hammering asphalt shingles along a sidewall – from LOA's guide to faulty flashing in EPDM roofing in Austin

Flashing is one of the most critical underlying components of any roofing system, including EPDM roofs. When the flashing isn’t installed correctly it can lead to a number of problems that compromise more than the roof.

The flashing of a EPDM roof helps to prevent moisture from leaking through to the roof deck at the most vulnerable points. It’s used around roof vents, pipes, chimneys and along valleys. Basically anywhere there is a seam where a wall meet the roof or penetration point you should find flashing.

Water penetration, leaks, mildew growth and water ponding are all common problems when the flashing isn’t installed right. Membrane shrinkage is another significant problem associated with improper installation. The issue may not be noticeable at first, so without regular maintenance and inspections flashing installation problems could go from bad to worse leading to extensive repairs that could have been avoided.

Is the flashing of your EPDM roofing looking faulty?

Contact LOA to Line Up a Free Roof Inspection to Find Out For Sure!

What Causes Faulty Flashing in EPDM Roofing on Austin Roofs?

Fixing issues with the flashing is actually a pretty common roof repair. Flashing problems usually come down to one of two main issues: improper installation and inadequate flashing during installation.

  • Poor Installation
    Poor installation of either the roof membrane or the flashing itself can lead to a lot of problems. Signs that poor installation is to blame for flashing problems include:
    • Faulty seams from insufficient use of sealant or using the wrong kind of sealant
    • Improperly secured membranes
    • Using the wrong type of roof flashing
  • Inadequate Flashing
    Even if flashing is installed correctly, you can run into problems if the flashing is inadequate around penetrations like chimneys and pipes. Signs that this is the problem include:
    • Roofing that’s pulling away at corners and edges
    • Gaps in the seams that allow water through
    • Flashing that doesn’t extend all the way to the edge to properly secure and seal

No matter the cause, your EPDM roofing system is at risk when the flashing isn’t doing its job. Without properly installed flashing the drainage system won’t work and water damage can quickly form.

How LOA Repairs Faulty Flashing in EPDM Roofing in Austin

When there are flashing installation issues you’ll need the help of a professional roofer that understands EPDM roofing systems. There are a few ways to approach this type of EPDM roof damage. The best course of action for roof repairs depends on the flashing issue.

Replace Incompatible Materials With Compatible Options

Proper techniques involve using compatible materials. With an EPDM rubber membrane flashing tape is usually the best option. It’s self-curing and flexible making it great for irregular shapes and surfaces. Semi-cured overlayment strips are also ideal for ends and edges since it provides added tear resistance.

Fix Loose Spots With Adequate Adhesion

Another reason flashing comes loose is inadequate adhesion of the roof membrane. It can be especially problematic around penetration points. Have the roof inspected by a professional who can identify areas where the adhesion is an issue then follow up by properly sealing those areas so there’s no movement. The roofer will also need to ensure the right sealant and proper pressure is used to adhere flashing after the roofing membrane is securely in place.

Use Termination Bars

If there are issues with water penetration at the top of the roofline, then termination bars may need to be installed. They are fastened to the substrate at the top of flashing to create a watertight barrier.

Repair and Patch Damaged Areas of the Roof System

If portions of the roof have sustained water damage they’ll need to be repaired when the flashing is fixed. This typically requires patching over the damaged portion of the EPDM membrane and removing pieces of flashing. You’ll have to cut out the damaged flashing, thoroughly clean the area then install a new piece of flashing that’s the correct material and size. The new flashing will need to overlap the old flashing by a few inches on either side.

Preventing Faulty Flashing in EPDM Roofing

Even if your replace the flashing, regular inspections and minimal maintenance are needed to keep an eye out for future issues. Storms that bring heavy rainfall and cause falling branches can damage the flashing overnight. There could also be other problems like membrane shrinkage that causes flashing to come loose.

Because the flashing is essential for preventing water penetration, mold growth and structure damage, always inspect the roof after adverse weather and at least once a year even if there are no storms. Follow up with roof maintenance that can help you avoid major repairs and improve performance over the long-term.

The roofers at LOA can fix roof flashing in a flash. We’ll figure out the underlying problems and best roofing solutions to get it resolved quickly. If you’re experiencing flashing problems in the Austin, TX area, give us a call at (512) 375-3654.

Diagram of drip edge flashing at a roof edge – from LOA's guide to faulty flashing in EPDM roofing in Austin

Warning Signs of Faulty Flashing in EPDM Roofing

Watch for roofing that’s pulling away at corners and edges, gaps in the seams that let water through, and flashing that doesn’t extend all the way to the edge. Faulty seams from too little or the wrong kind of sealant, improperly secured membranes and the wrong type of flashing all point to installation problems.

We’re One of the Highest Rated
Roofers in Austin for a Reason

At LOA, we believe success is defined by customer satisfaction. We’re proud to say we have some of the happiest clients in the roofing industry! You can find hundreds of 5-star reviews like the ones below online.
Contact Us (512) 375-3654