8 Austin Roofing Maintenance Tips


Many homeowners every year get a Austin roof repair or roof replacement, either because of the age of their roof or there was damage from a previous storm. Due to this, many Austin roof experts suggest conducting an inspection on your roof at least twice a year.

Simply, routine maintenance is an inspection checklist that should be gone through semi-annually to be able to address any potential issues found. The purpose is to keep costly roof repairs at bay and maximizing the life expectancy of your roofing system. Here are the top 8 Austin roofing maintenance tips for homeowners.


Tips To Maintain Your Austin Roof


Without overlooking any aspect that might require immediate attention, your roof inspection checklist helps you identify and prevent any long-term damage. Here is the list of steps that should be performed periodically to help protect your Austin, Texas roofing system.

1. Look over the inside of your home

Before checking your roof, begin by examining the inside of your home for signs of water damage problems, such as:

  • broken pipes
  • dripping
  • plumbing leaks
  • mold forming
  • water stains
  • peeling paint


Be sure that you closely look at any signs during your inspection phase so that the problem detection happens at an initial phase. For areas with heavy rainfall, do check for structural tensions like bulging patches on your interior walls, rot, rust, and open cracks in beams, and trusses.

2. Inspect the Surface of Your Roof

Inspect the roof closely to check for any damage. If you see a pool of standing water in a low spot on your roof, this is one of the first signs of damage to look for on roofing, especially a flat roof.

Austin Roof Inspector

Checking the surface of a roof will sometimes depend on the type of roofing material used, such as if an asphalt roof is used, check for missing or broke shingles. Whereas, if looking at a metal roof, inspect for corrosion or rust. But for most roofing systems, always look for any holes, fungi, algae, water stains, and scratches in the roofing membrane. 

3. Look At Cleanliness Of Your Roof

For Austin roofs, it’s important to ensure that your roof is free of any overhanging tree branches, fallen leaves, dirt, or pooling rainwater.  All of these will have an impact on the health of the roof material membrane and can lead to early rotting or decay of your roof.

4. Clean Your Gutters

Gutters are one of the easiest  spots for water to gather and become an issue for your foundation. Oftentimes if your gutters are clogged by moss or mold, this forces the water to pool, causing the water to seep into the foundation and cause structural damage.

5. Immediately Inspect Roof After Severe Weather

Severe weather happens and most of us don’t think much of it, but it’s no surprise that an intense storm can be the worst thing for your roof. You should always get in the habit of inspecting your roof for damage after severe weather such as hailstorms, heavy rains, and wind storms.

Hiring a trained roofing specialist to conduct a proper inspection will help you spot and repair any damage. Trained Austin roofing contractors are equipped to start the procedure by visually evaluating your shingles. They will help you identify missing, curled, and flapping asphalt shingles, while also repairing broken shingles to ensure the roof assembly is not damaged.

For the best results, Use a licensed roofing company in Austin, as they are equipped to make the roof replacement and repair process easy and as straightforward as possible


6. Check for Flashings

Flashings are generally used to install skylights on rooftops. They are often not thought of as an important aspect to inspect, but if they are not check then they may not be working correctly. This can cause water to leak through the exposed area, meaning the roofing company in Austin needs to pay particular attention to this area.

7. Masonry & Metal

Masonry and metalwork are other areas of a roofing system that many homeowners often forget about. Just as it is important to check the flashings and gutters, you should also check your chimneys for roof cracks or missing mortar.

As always, keep an eye out for any signs of corrosion, cracking, or structural damage of any size in your masonry fixtures. That’s because loose metal or other components on a roof are a common point of water entry.

8. Rooftop Equipment

 Examine your rooftop equipment for any problems that may allow water infiltration, such as air conditions, vents, ductwork, skylights, and solar panels

 Everyday roofing is exposed to weather and time-bound hazards contributing to its damage and deterioration. If left unattended, ignoring roofing issues can turn into expensive disasters in the future.